aboutsummaryrefslogtreecommitdiff
path: root/cgit.c
AgeCommit message (Collapse)Author
2013-08-12cache: document negative ttls and add about ttlJason A. Donenfeld
We've long supported negative ttls, for infinite cache, except the documentation incorrectly showed one of our defaults as being 5 and not -1. As well, with a negative ttl, we were actually making the HTTP expired header go backwards. This changes it to go ahead ten years instead. Further, we add an cache-about-ttl option to set a different ttl for about pages, which are now increasingly being filtered through markdown or just sent statically anyway. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-08-12use favicon by defaultChristian Hesse
2013-05-26readme: use string_list instead of space deliminationsJason A. Donenfeld
Now this is possible in cgitrc - readme=:README.md readme=:readme.md readme=:README.mkd readme=:readme.mkd readme=:README.rst readme=:readme.rst readme=:README.html readme=:readme.html readme=:README.htm readme=:readme.htm readme=:README.txt readme=:readme.txt readme=:README readme=:readme readme=:INSTALL.txt readme=:install.txt readme=:INSTALL readme=:install Suggested-by: John Keeping <john@keeping.me.uk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25readme: Accept multiple candidates and test them.Jason A. Donenfeld
The readme variable may now contain multiple space deliminated entries, which per usual are either a filepath or a git ref filepath. If multiple are specified, cgit will now select the first one in the list that exists. This is to make it easier to specify multiple default readme types in the main cgitrc file and have them automatically get applied to each repo based on what exists. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25ui-summary: Pass filename to about-filterJason A. Donenfeld
This gives the about-filter API the same semantics as source-filter, where the filter receives the filename so it can decide what to do next with it. While we're at it, plug a memory leak. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25cgit.c: Do not reset HOME after unsetting it.Jason A. Donenfeld
The number of odd cases in which git will try to read config is far too great to keep putting a bandaid over each one, so we'll just unset it. If it turns out that scripts really liked to know about $HOME, we can always reset it in the filter forks. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25cgit.c: sync repo config printing with struct cgit_repoJason A. Donenfeld
We've now added quite a few config keys for repositories, but we've forgotten to update the printing of it for cache files. Synchronize the two. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-04-10Add branch-sort and repo.branch-sort options.Jason A. Donenfeld
When set to "name", branches are sorted by name, which is the current default. When set to "age", branches are sorted by the age of the repository. This feature was requested by Konstantin Ryabitsev for use on kernel.org. Proposed-by: Konstantin Ryabitsev <mricon@kernel.org>
2013-04-10cgit.c: Do not restore unset environment variablesLukas Fleischer
getenv() returns a NULL pointer if the specified variable name cannot be found in the environment. However, some setenv() implementations crash if a NULL pointer is passed as second argument. Only restore variables that are not NULL. See commit d96d2c98ebc4c2d3765f5b35c4142e0e828a421b for a related patch. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-04-08Do not load user or system gitconfig and gitattributesJason A. Donenfeld
While doing any kind of git loading, unset HOME variables and set NOSYSTEM variables so that cgit does not load any settings that a user may have set for his own /usr/bin/git usage. This fixes a fatal error introduced with git 1.8, whereupon git would fatally exit when failing to access particular files. The result of this is that only repo-local configuration files are accessed: zx2c4@thinkpad ~/Projects/cgit $ HOME=/root QUERY_STRING="url=foo/log" CGIT_CONFIG=tests/trash/cgitrc strace -e access ./cgit >/dev/null access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) access("repos/foo/.git/objects", X_OK) = 0 access("repos/foo/.git/refs", X_OK) = 0 access("repos/foo/.git/config", R_OK) = 0 access("repos/foo/.git/config", R_OK) = 0 access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0 access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0 access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0 access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0 +++ exited with 0 +++ Reported-by: Ferry Huberts <ferry.huberts@pelagic.nl> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Ferry Huberts <ferry.huberts@pelagic.nl> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-04-08use struct strbuf instead of static buffersJohn Keeping
Use "struct strbuf" from Git to remove the limit on file path length. Notes on scan-tree: This is slightly involved since I decided to pass the strbuf into add_repo() and modify if whenever a new file name is required, which should avoid any extra allocations within that function. The pattern there is to append the filename, use it and then reset the buffer to its original length (retaining a trailing '/'). Notes on ui-snapshot: Since write_archive modifies the argv array passed to it we copy the argv_array values into a new array of char* and then free the original argv_array structure and the new array without worrying about what the values now look like. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-04-08Convert cgit_print_error to a variadic functionJohn Keeping
This removes many uses of "fmt" which uses a fixed size static pool of fixed size buffers. Instead of relying on these, we now pass around argument lists for as long as possible before using a strbuf to render content of an arbitrary size. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-04-08Fix out-of-bounds memory accesses with virtual_root=""John Keeping
The CGit configuration variable virtual_root is normalized so that it does not have a trailing '/' character, but it is allowed to be empty (the empty string and NULL have different meanings here) and there is code that is insufficiently cautious when checking if it ends in a '/': if (virtual_root[strlen(virtual_root) - 1] != '/') Clearly this check is redundant, but rather than simply removing it we get a slight efficiency improvement by switching the normalization so that the virtual_root variable always ends in '/'. Do this with a new "ensure_end" helper. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-04-08Do not unnecessarily strdup() environment variablesLukas Fleischer
This reverts the memory duplication introduced in commit 60a2627, while keeping everything else that has been cleaned up. The environment variables are never modified, so we do not need to call xstrdupn() here. Also, remove xstrdupn() which is no longer needed. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-04-08Maŕk cgit_environment members constLukas Fleischer
These reflect the values of environment variables and should never be changed. Add another xstrdup() when we assign environment variables to strings that are potentially non-constant. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-03-05find_default_branch(): Free refmatch after usageLukas Fleischer
Fixes following memory leak seen with "PATH_INFO=/cgit/refs/": ==13408== 7 bytes in 1 blocks are definitely lost in loss record 4 of 52 ==13408== at 0x4C2C04B: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) ==13408== by 0x56F2DF1: strdup (in /usr/lib/libc-2.17.so) ==13408== by 0x46CA78: xstrdup (wrapper.c:35) ==13408== by 0x405840: find_current_ref (cgit.c:426) ==13408== by 0x44BE5A: do_one_ref (refs.c:527) ==13408== by 0x44D3E0: do_for_each_ref_in_dir (refs.c:553) ==13408== by 0x44D85A: do_for_each_ref (refs.c:1298) ==13408== by 0x405889: find_default_branch (cgit.c:438) ==13408== by 0x405AC4: prepare_repo_cmd (cgit.c:490) ==13408== by 0x405D97: process_request (cgit.c:557) ==13408== by 0x407490: cache_process (cache.c:322) ==13408== by 0x406C18: main (cgit.c:864) Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-03-05Mark several functions/variables staticLukas Fleischer
Spotted by parsing the output of `gcc -Wmissing-prototypes [...]`. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-03-04cgit.c: Remove parameter from guess_defbranch()Lukas Fleischer
We use resolve_ref() since commit 8d7c2ec2, so this is no longer needed. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-03-04White space around control verbs.Jason A. Donenfeld
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-03-04Fix several whitespace errorsLukas Fleischer
* Remove whitespace at the end of lines. * Replace space indentation by tabs. * Add whitespace before/after several operators ("+", "-", "*", ...) * Add whitespace to assignments ("foo = bar;"). * Fix whitespace in parameter lists ("foobar(foo, bar, 42)"). Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-03-02Update git to v1.7.9.7John Keeping
resolve_ref() is renamed to resolve_ref_unsafe(). CGit's usage is safe. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-02-01Make "owner" column on index page configurableFlorian Pritz
This is not really needed for personal sites where all repos belong to the same person. Since it is pretty useful for shared sites however, it should be configurable. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-10-17ui-log: Add "commit-sort" option for controlling commit orderingTobias Bieniek
This makes it possible to use strict commit date ordering or strict topological ordering by passing the corresponding flags to "git log". Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-10-17ui-repolist: Add "section-sort" flag to control section sorting.Tobias Bieniek
Flag which, when set to "1", will sort the sections on the repository listing by name. Set this flag to "0" if the order in the cgitrc file should be preserved. Default value: "1". Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-10-17scan-tree: Unify gitweb.* and cgit.* settings into one config option.Jason A. Donenfeld
After some back and forth with Jamie and René, it looks like the git config semantics are going to be like this: - gitweb.category maps to the cgit repo config key "section" - gitweb.description maps to the cgit repo config key "desc" - gitweb.owner maps to the cgit repo config key "owner" - cgit.* maps to all cgit repo config keys This option can be enabled with "enable-git-config=1", and replaces all previous "enable-gitweb-*" config keys. The order of operations is as follows: - git config settings are applied in the order that they exist in the git config file - if the owner is not set from git config, get the owner using the usual getpwuid call - if the description is not set from git config, look inside the static $path/description file - if section-from-path=1, override whatever previous settings were inside of git config using the section-from-path logic - parse $path/cgitrc for local repo.* settings, that override all previous settings
2012-10-16ui-repolist: Rename section-sort to repository-sort.Jason A. Donenfeld
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-10-16repo_config: do not let globals override repo settingsTobias Bieniek
This makes it possible to activate the enable_commit_graph, enable_log_filecount, and enable_log_linecount for individual repositories, even if the global setting is "0" (default). The commit that introduced the broken behavior was e189344, and the commit message of that makes it clear that this wasn't the intended behavior. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-07-12Update copyright headers to have latest dates.Jason A. Donenfeld
2012-07-12ui-repolist: Case insensitive sorting and age sortJason A. Donenfeld
Add two options, one for doing the ordinary name sorts in a case-insensitive manner, and another for choosing to sort repos in each section by age instead of by name.
2012-07-12scan-tree: Support gitweb.category.Jason A. Donenfeld
Use gitweb.category from git config to determine repo's section, if option is enabled.
2012-07-12scan-tree: Support gitweb.description.Jason A. Donenfeld
Use gitweb.description instead of description file to determine description, if option is enabled.
2012-03-18Merge branch 'fh/mimetypes'Lars Hjemli
2012-03-18Merge branch 'jp/defbranch'Lars Hjemli
2012-03-18Merge branch 'lh/module-links'Lars Hjemli
2012-01-03Merge branch 'stable'Lars Hjemli
2012-01-03Fix diff mode switching when side-by-side-diffs=1Tim Chen
When side-by-side-diffs=1 was set in cgitrc, specyfing 'ss=0' in the query- string would not switch to unified diffs. This patch fixes the issue by introducing a separate variable to track the occurrence of "ss" in the querystring.
2011-07-19ui_plain: automatically lookup mimetype when mimetype-file is setFerry Huberts
For sites that do not want to configure mime types by hand but still want the correct mime type for 'plain' blobs, configuring a mime type file is made possible. This is handy since such a file is normally already provided (at least on Linux systems). Also, this reflects the gitweb option '$mimetypes_file' Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-20cgit.c: use resolve_ref() to guess_defbranch()Lars Hjemli
The resolve_ref() function handles reading of git- and filesystem symbolic links (including proper whitespace trimming) and packed refs. There's no point in reimplementing this function in cgit. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-20Only guess default branch when a repo page is requestedLars Hjemli
There's no need to invoke guess_defbranch() for each repo during scan-path, since repo.defbranch is only used when repo content is being displayed. Also, some users prefer to register their projects manually in cgitrc but they got no benefit from the new repo.defbranch handling. This patch tries to rectify these issues by only invoking guess_defbranch() when needed, regardless of how the repo was registered. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-18Merge branch 'stable'Lars Hjemli
2011-06-18cgit.c: improve error message when git repo cannot be accessedLars Hjemli
The current 'Not a git repository' error message is not very helpful, since it doesn't state the cause of the problem. This patch uses errno to provide a hint of the underlying problem. It would have been even better to give the exact cause (e.g. for ENOENT it would be nice to know which file/directory is missing), but that would require reimplementing setup_git_directory_gently() which seems a bit overkill. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-15Do not provide a default value for `module-link`Lars Hjemli
The old default value was an abomination which never should have been allowed to see the light of day. This patch removes the default, which is a backwards incompatible change with low probability of causing anyone any real trouble (a repo with submodules, displayed by cgit using the default value of `module-link`, is very unlikely to actually generate working links). Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-15ui-tree.c: add support for path-selected submodule linksLars Hjemli
The current 'repo.module-link' option is sufficient when all gitlinks in a repository can be converted to commit links in a uniform way, but not when different submodules/paths needs different settings. This patch adds support for 'repo.module-link.<path>', which will be used for linking to submodules at paths matching one such entry. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-13cgit.c: add 'clone-url' setting with support for macro expansionLars Hjemli
The current 'clone-prefix' setting has some known issues: * All repos get the same 'clone-prefix' value since the setting is not adopted during repo registration (in cgitrc, or during scan-path traversal), but only when the setting is used. * The generated clone-urls for a repo is a combination of 'clone-prefix', a slash and the repo url. This doesn't work well with e.g. ssh-style urls like 'git@example.org:repo.git', since the inserted slash will make the repo relative to the filesystem root. * If 'remove-suffix' is enabled, the generated clone-urls will not work for cloning (except for http-urls to cgit itself) since they miss the '.git' suffix. The new 'clone-url' setting is designed to avoid the mentioned issues: * Each repo adopts the default 'clone-url' when the repo is defined. This allows different groups of repos to adopt different values. * The clone-urls for a repo is generated by expanding environment variables in a string template without inserting arbitrary characters, hence any kind of clone-url can be generated. * Macro expansion also eases the 'remove-suffix' pain since it's now possible to define e.g. 'clone-url=git://foo.org/$CGIT_REPO_URL.git' for a set of repos. A furter improvement would be to define e.g. $CGIT_REPO_SUFFIX to '.git' for all repos which had their url prettified, or to store the original $CGIT_REPO_URL in e.g. $CGIT_REPO_REAL_URL before suffix removal. Reviewed-by: Ferry Huberts <mailings@hupie.com> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-13cgit.c: always setup cgit repo environment variablesLars Hjemli
When cgit learned to setup environment variables for certain repo settings before invoking a filter process, the setup occurred inside cgit_open_filter(). This patch moves the setup out of cgit_open_filter() and into prepare_repo_cmd() to prepare for additional uses of these variables. Reviewed-by: Ferry Huberts <mailings@hupie.com> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-05-23Merge branch 'fh/filter-api'Lars Hjemli
Conflicts: cgit.c
2011-05-23Merge branch 'stable'Lars Hjemli
2011-05-23fix virtual-root if script-name is ""Mark Lodato
In d0cb841 (Avoid trailing slash in virtual-root), virtual-root was set from script-name using trim_end(). However, if script-name was the empty string (""), which happens when cgit is used to serve the root path on a domain (/), trim_end() returns NULL and cgit acts like virtual-root is not available. Now, set virtual-root to "" in this case, which fixes this bug. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-05-14Merge branch 'dm/disable-clone'Lars Hjemli
2011-03-26new_filter: correctly initialise all arguments for a new filterFerry Huberts
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl> Signed-off-by: Lars Hjemli <hjemli@gmail.com>